Vergleichsdaten MMA + Epoxydkleber

Aus R_G Wiki
Zur Navigation springenZur Suche springen
Die druckbare Version wird nicht mehr unterstützt und kann Darstellungsfehler aufweisen. Bitte aktualisiere deine Browser-Lesezeichen und verwende stattdessen die Standard-Druckfunktion des Browsers.

Zurück zum Shop

 

 

Auswahlhilfe/VergleichsdatenMMA + Epoxydkleber

 

MD-MEGABOND
2000

(155145x)

MD-MEGABOND
2030

(1551451-30)

MD-MEGABOND
3000

(155146x)

MD-POLY
(155147x)

MD-
CLEARBOND

(155148x)

MD POX
5 Minuten

(1551411)

MD POX
30 Minuten

(1551421)

Epoxyd
Minutenkleber

(155116x)

1 Min.
-Epoxy

(154100x)

5 Min.
-Epoxy

(155100x)

10 Min.
-Epoxy

(155112x)

30 Min.
-Epoxy

(154300x)

90 Min.-Epoxy
(158100x)

ELAN-tech
891.892

(153891x)

Klebstoffbasis

Adhesive base

MMA MMA MMA MMA MMA EP EP EP EP EP EP EP EP EP

Verarbeitungszeit in Minuten bei 23-25 °C

Processing time in
minutes at 23 °C
5-7 10-12 2 – 4 2 – 4 2 – 4 5 30 3 1 5 10 30  90 = 1: 1 135
Handlingsfestigkeit in Minuten bei 23 °C*
*Aushärtezeit bis zum Erreichen einer
Mindestzugscherfestigkeit auf Aluminium von 1 MPa
 
Handling strength in
minutes at 23 ° C *
* Curing time until a minimum tensile shear strength on aluminum of 1 MPa is reached
18-22 30-45 12-18 12-18 12-18 10-12 60-120 30 20 45 90 240 1 : 1 = 7 h 4h

Anzahl der Komponenten

Number of components

2 2 2 2 2 2 2 2 2 2 2 2 2 2

Mischungsverhältnis
in Gewichtsteilen (Kartuschen in Volumenteilen)

Mixing ratio in parts by weight (cartridges in parts by volume)

1 : 1 1 : 1 1 : 1 10 : 1 1 : 1 1 : 1 1 : 1 1 : 1 1 : 1 1 : 1 1 : 1 1 : 1 1 : 1 2 : 1

Viskosität in MPas

Viscosity in MPas

150.000 bis 200.000 150.000 bis 200.000 150.000 bis 200.000 5.000 bis 8.000 25.000 bis 30.000 8.000 bis 16.000 9.000 bis 15.000 9.000 bis 15.000 9.000 bis 15.000 9.000 bis 15.000 9.000 bis 15.000 9.000 bis 15.000 9.000 bis 15.000 100.000 bis 150.000

Maximales Spaltfüllvermögen in mm

Maximum gap fill in mm

5 5 5 0,5 0,5 3 2 0,5 0,5 0,5 0,5 0,5 0,5 5
Haltbarkeit in Monaten
bei einer Lagerung zwischen 15 und 20 °C
 
Shelf life in months at a storage between 15 and 20 ° C
12 12 12 12 12 12 12 12 12 12 12 12 12 12

Farbe

Color

milchig gelb

milky yellow

milchig gelb

milky yellow

schwarz

black

weiß

white

transparent

clear

gelblich

yellowish

gelblich

yellowish

gelb-transparent

yellow-clear

gelb-transparent

yellow-clear

gelb-transparent

yellow-clear

gelb-transparent

yellow-clear

gelb-transparent

yellow-clear

gelb-transparent

yellow-clear

schwarz

black

Anwendungsgebiete

Areas of application

Zum Verkleben von Metallen, Keramik, Glas, Stein und vielen harten Kunststoffen wie ABS, Polystyrol, PVC, PMMA (nicht klebbare Kunststoffe sind PTFE, Polyethylen, Polypropylen, Weich-PVC und Polyamid)

For bonding metals, ceramics, glass, stone and many hard plastics such as ABS, polystyrene, PVC, PMMA (not bondable plastics are PTFE, polyethylene, polypropylene, flexible PVC and polyamide)

Zum Verkleben von Metallen, Keramik, Glas, Stein und vielen harten Kunststoffen wie ABS, Polystyrol, PVC, PMMA (nicht klebbare Kunststoffe sind PTFE, Polyethylen, Polypropylen, Weich-PVC und Polyamid)

For bonding metals, ceramics, glass, stone and many hard plastics such as ABS, polystyrene, PVC, PMMA (not bondable plastics are PTFE, polyethylene, polypropylene, flexible PVC and polyamide)

Verklebung von Kunststoffen wie z.B. ABS, Polystyrol, Polycarbonat, PMMA, Polyurethan, PVC (hart), Verbundwerkstoffe wie z.B. GFK und CFK, SMC und BMC und Metallen wie z.B. Aluminium, Messing, Kupfer, Stahl und Edelstahl

Bonding of plastics, such as e.g. ABS, polystyrene, polycarbonate, PMMA, polyurethane, PVC (hard), composite materials such as GRP and CRP, SMC and BMC, and metals such as Aluminum, brass, copper, steel and stainless steel

Zum Kleben von polyofinen und niederenergetischen Kunststoffen

For bonding of polyolefins and low energy plastics

Für transparente Verklebungen von Glas, Kunststoffen (speziell PMMA) und Metallen geeignet

Suitable for transparent bonding of glass, plastics (especially PMMA) and metals.

Verklebt viele Kunsstoffe, Metalle, Glas, Holz, Leder, Stein und Keramik

Suitable for  bonding of glass, plastics, wood, leather, stone and metals.

Verklebt viele Kunsstoffe, Metalle, Glas, Holz, Leder, Stein und Keramik

Suitable for  bonding of glass, plastics, wood, leather, stone and metals.

Sehr gut geeignet für Holz, Metall, Stein, Hartschäume und viele Kunststoff

Very suitable for wood, metal, stone, rigid foams and many plastics

Sehr gut geeignet für Holz, Metall, Stein, Hartschäume und viele Kunststoffe

Very suitable for wood, metal, stone, rigid foams and many plastics

Sehr gut geeignet für Holz, Metall, Stein, Hartschäume und viele Kunststoffe

Very suitable for wood, metal, stone, rigid foams and many plastics

Sehr gut geeignet für Holz, Metall, Stein, Hartschäume und viele Kunststoffe

Very suitable for wood, metal, stone, rigid foams and many plastics

Sehr gut geeignet zum Verkleben von Holz, Metallen, Stein, Glas, Hartschäumen und Faserverbundwerkstoffen wie z.B. GFK und CFK

Very well suited for bonding wood, metal, stone, glass, foams and composite fiber materials such as GFK and CFK

Sehr gut geeignet zum Verkleben von Holz, Metallen, Stein, Glas, Hartschäumen und Faserverbundwerkstoffen wie z.B. GFK und CFK

Very well suited for bonding wood, metal, stone, glass, foams and composite fiber materials such as GFK and CFK

Sehr gut geeignet zum Verkleben von Holz, Metallen, Stein, Glas, Hartschäumen und Faserverbundwerkstoffen wie z.B. GFK und CFK

Very well suited for bonding wood, metal, stone, glass, foams and composite fiber materials such as GFK and CFK

Eigenschaften

Properties

Thixotrop

thixotropic

Thixotrop

thixotropic

Thixotrop

thixotropic

Thixotrop

thixotropic

Geringe Viskosität

low viscosity

Mittlere Viskosität

medium viscosity

Mittlere Viskosität

medium viscosity

Mittlere Viskosität

medium viscosity

Mittlere Viskosität

medium viscosity

Mittlere Viskosität

medium viscosity

Mittlere Viskosität

medium viscosity

Mittlere Viskosität

medium viscosity

Mittlere Viskosität

medium viscosity

Thixotrop

thixotropic

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Zuverlässige Verklebung von PE, PP, Teflon oder EPDM ohne Vorbehandlung der zu fügenden Oberflächen

Reliable bonding of PE, PP, Teflon or EPDM without pretreatment of the surfaces to be joined

Stoß- und vibrationsfest

Shock and vibration resistant

Für viele Reparaturen an Ort und Stelle mit hoher Qualität und geringem Aufwand. Einfache Handhabung durch automatisch geregeltes Zweidüsensystem.

For many repair on the spot  with high quality and  little effort. Easy handling thanks to the automatically two-nozzle system.

Für viele Reparaturen an Ort und Stelle mit hoher Qualität und geringem Aufwand. Einfache Handhabung durch automatisch geregeltes Zweidüsensystem.

For many repair on the spot  with high quality and  little effort. Easy handling thanks to the automatically two-nozzle system.

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Für viele Reparaturen an Ort und Stelle mit geringem Aufwand

For many repair on the spot with little effort

Struktureller Klebstoff mit variablem Mischungsverhältnis.

Structural adhesive with variable mixing ratio.

Speziell für die strukturelle Verklebung von CFK-Bauteilen entwickelt

Designed specifically for the structural bonding of CFRP components

Hohe Schlag-, Schäl- und Zugscherfestigkeiten

High impact, peel and tensile shear strengths

Hohe Schlag-, Schäl- und Zugscherfestigkeiten

High impact, peel and tensile shear strengths

Hohe Schlag-, Schäl- und Zugscherfestigkeiten

High impact, peel and tensile shear strengths

   

Erreicht eine extrem hohe Festigkeit

Achieves extremely high strength

Erreicht eine extrem hohe Festigkeit

Achieves extremely high strength

         

Hohe Schlag-, Schäl- und Zugscherfestigkeiten

High impact, peel and tensile shear strengths

Hohe Schlag-, Schäl- und Zugscherfestigkeiten

High impact, peel and tensile shear strengths

Hohe Beständigkeit gegen Witterungseinflüsse

High resistance to weathering

Hohe Beständigkeit gegen Witterungseinflüsse

High resistance to weathering

Hohe Beständigkeit gegen Witterungseinflüsse

High resistance to weathering

   

Witterungsbeständig

Weatherproof

Witterungsbeständig

Weatherproof

         

Hohe Zähigkeit

high toughness

Sehr hohe Zähigkeit

very high toughness

Hohe Toleranz gegenüber schlecht vorbereiteten Fügeteiloberflächen

High tolerance to poorly prepared adherend surfaces

Hohe Toleranz gegenüber schlecht vorbereiteten Fügeteiloberflächen

High tolerance to poorly prepared adherend surfaces

Hohe Toleranz gegenüber schlecht vorbereiteten Fügeteiloberflächen

High tolerance to poorly prepared adherend surfaces

Kein zusätzlicher Primerauftrag notwendig

No additional primer application necessary

 

Auch als Vergussmasse geeignet

Also suitable as a casting compound

Auch als Vergussmasse geeignet.

Bleibt zäh flexibel und kann daher bei Stößen und Vibration eine dauerhafte Festigkeit gewährleisten.

Also suitable as a casting compound.

Remains stiffly flexible and can therefore guarantee permanent rigidity in case of impacts or vibration.

             

Bruchdehnung in %

Elongation at break in %

2,5 3 140 7-10                   6

Härtung

Curing

kalthärtend

Cold curing

kalthärtend

Cold curing

kalthärtend

Cold curing

kalthärtend

Cold curing

kalthärtend

Cold curing

kalthärtend
Handfest nach
10-12 min
Funktionsfest nach 20-30 min
Vollständig ausgehärtet nach 24 h
 
Cold curing
fixture after 10-12 min
Functional hard after
20-30 min
Fully cured after 24 hours
kalthärtend
Handfest nach
60-120 min
Funktionsfest nach 240-360 min
Vollständig ausgehärtet nach
24 h
 
Cold curing
fixture after 60-120 min
function hard for
240-360 minutes
Fully cured after 24 hours
kalthärtend Handfest nach 10-12 min
Funktionsfest nach 20-30 min
Vollständig ausgehärtet nach 24 h
 
Cold curing
fixture after 10-12 min
Functional hard after 20-30 min
Fully cured after 24 hours
kalthärtend Handfest nach 5-6 min
Funktionsfest nach 10-15 min
Vollständig ausgehärtet nach 12 h
 
Cold curing
fixture after 5-6 min function hard for 10-15 minutes
Fully cured after 12 hours
kalthärtend Handfest nach 10-12 min
Funktionsfest nach 20-30 min
Vollständig ausgehärtet nach 24 h
 
Cold curing
fixture after 10-12 min
function hard for 20-30 minutes Fully cured after 24 hours
kalthärtend Handfest nach 20-25 min
Funktionsfest nach 45-60 min
Vollständig ausgehärtet nach 24 h
 
Cold curing
fixture after 20-25 min
function hard for 45-60 minutes
Fully cured after 24 hours
kalthärtend
Handfest nach 90-120 min
Funktionsfest nach 240-480 min
Vollständig ausgehärtet nach 48 h
 
Cold curing
fixture after 90-120 min
function hard for 240-480 minutes
Fully cured after 48 hours
kalthärtend
(eine Warmhärtung verbessert die mechanischen Eigenschaften und die Wärmeformbeständigkeit)
 
Cold curing (heat curing improves the mechanical properties and dimensional stability under heat)
kalthärtend
(eine Warmhärtung verbessert die mechanischen Eigenschaften und die Wärmeformbeständigkeit)
 
Cold curing (heat curing improves the mechanical properties and dimensional stability under heat)

Wärmeformbeständigkeit

Heat resistance

-55 °C bis 120 °C -55 °C bis 120 °C -55 °C bis 120 °C -55 °C bis 120 °C -40 °C bis 80 °C -40 °C bis 80 °C -40 °C bis 80 °C -25 °C bis 55 °C -25 °C bis 55 °C -25 °C bis 55 °C -25 °C bis 55 °C -25 °C bis 55 °C
24h / 25°C = 40 °C
7 d / 25 °C = 60 °C
30 min / 100 °C = 75 °C
5 min / 180 °C = 78 °C
24 h / 23 °C = 60 °C
2 h / 80 °C = 85 °C

Mechanische Kennwerte Klebeproben /Mechanical characteristics adhesive samples

Zugscherfestigkeit in MPa

Tensile shear strength in MPa

Stahl/steel 30 Stahl/steel 30 Stahl/steel22 GFK/ FRP15 Stahl/steel 22     Stahl/steel 10        
1: 1 AlCuMg1
7 d / 23 °C = 10,9
Inox AISI 316
6 h / 23 °C = 17
Aluminium / aluminum27 Aluminium /aluminum27   Aluminium /aluminum14 Aluminium /aluminum14        
1: 1 AlCuMg1
16 h / 23 °C + 0,5 h / 70 °C = 9,3
   
 
Inox AISI 316
24 h / 23 °C = 23
Polycarbonat 13 Polycarbonat 13   Polycarbonat 6 Polycarbonat 3              
 
 
Inox AISI 316
7 d / 23 °C = 25
ABS 8 ABS 8   ABS 7 ABS 4              
 
 
Inox AISI 316
2 h / 80 °C = 32
      PE 8                
 
Aluminium /aluminum
2 h / 80 °C = 32
      PP 8                
 
CFK /CFRP
2 h / 23 °C = 25
      LDPE 6                
 
CFK /CFRP
2 h / 80 °C = 32
      PVC hart 10                  

Biegefestigkeit = 90

flexural strength = 90

     

PMMA 7

                 

Biege-E-Modul = 2.200

 
 
Bending modulus = 2.200
      Polystyrol 5                  

Zugfestigkeit = 54

tensile strength = 54

                         

Druckfestigkeit = 70

Compressive strength = 70

Alle Informationen, Empfehlungen oder Ratschläge seitens der R&G Faserverbundwerkstoffe GmbH erfolgen nach bestem Wissen und Gewissen. Sie gelten als unverbindliche Hinweise und enthalten weder ausdrückliche noch stillschweigende Zusicherungen noch eine Garantie bestimmter Eigenschaften. Bei den angegebenen Eigenschaftskennwerten handelt es sich um typische Werte. Empfehlungen oder Ratschläge beschreiben unsere Produkte und mögliche Anwendungen in genereller oder beispielhafter, aber nicht auf den Einzelfall bezogener Weise. Im Zuge der ständigen technischen Weiterentwicklung und Verbesserung unserer Produkte können sich Veränderungen in den Kennwerten, Texten und Graphiken ergeben; ein besonderer Hinweis auf eine evtl. Veränderung erfolgt nicht. Der Kunde prüft eigenverantwortlich unsere Produkte in Hinblick auf ihre Eignung für die beabsichtigten nVerfahren und Zwecke sowie ihre entsprechende Verarbeitbarkeit, da die technischen Einsatzmöglichkeiten unserer Produkte zahlreich und je nach Fall sehr unterschiedlich sind. Sie nentziehen sich daher unseren Kontrollmöglichkeiten und liegen ausschließlich im Verantwortungsbereich des Kunden. Etwaige Schutzrechte sowie bestehende Gesetze und Bestimmungen sind vom Abnehmer bzw. Anwender in eigener Verantwortung zu beachten. Die Veröffentlichung ist keine Lizenz und beabsichtigt nicht die Verletzung irgendwelcher Patente.