Epoxy Casting Resin EXTRA 600 + Hardener

    Set of two components:
    2.84 kg

    Epoxy Casting Resin EXTRA 600 + Hardener

    Assortment adjustment. This discontinued item is qualitatively perfect goods without defects. Sale while stocks last.

    Epoxy Casting Resin EXTRA 600 + Hardener EXTRA 600, set of two components

    The Epoxy Casting Resin EXTRA 600 is a special system with long pot life and low exothermicity.

    • Free from phenol, alkylphenol and benzyl alcohol
    • Highly transparent components
    • Good UV resistance
    • Largely free of air bubbles
    • Polishable, hard surface
    • Very good impact strength
    • Low shrinkage
    • Can be modified with all kinds of fillers (metal powder, effect pigments, dry sand, etc.)
    • Can be coloured with transparent colours

    Mixing ratio:
    100 : 42
    parts by weight of resin to hardener

    Processing time*: approx. 600 minutes (up to gelling)
    Mixing viscosity (at 25 °C): 350 mPas
    Curing time: approx. 24 hours up to several days (depending on volume, layer thickness and temperature)
    Processing/curing temperature: 15 up to 20 °C (depending on volume and layer thickness)

    Technical data Resin:
    Viscosity
    (at 25 °C, DIN 530315): 2.200 ± 300 mPas
    Epoxy value, DIN 536188: 0.48 ± 0.02
    Epoxy equivalent weight: 210 ± 8
    Colour code (Gardener): ≤ 2
    Density (at 20 °C): 1.10 ± 0.02 g/cm3
    Shelf life (at 23 °C in original container): min. 12 months

    *) determined arithmetically

    Technical data Hardener:
    Viscosity
    at 25 °C, DIN 530315): 20 ± 15 mPas
    Amine value (mg KOH/g) according to DIN 16945: 310 ± 20
    H-Equivalent (g/Val.): 88.5
    Colour code (Gardener): ≤ 1
    Density (at 20 °C): 0.96 ± 0.02 g/cm3
    Shelf life (at 23 °C in original container): min. 12 months

    Application:
    Aquaristics, terraristics, arts and crafts, wood finishing, furniture construction (Rivertable), slides, aircraft, ship, car and railway model construction.

    Processing:
    The processing and curing time depends strongly on the volume applied and the ambient conditions. Therefore we cannot give any values because of the large number of variables (e.g. volumes, geometries, etc.). In our opinion, however, the processing time is sufficiently long to allow even larger grouting. Due to the reduced reactivity, the curing time is longer and is certainly several days.

    The tool with which the components are stirred plays an important role in mixing the components; it should generate as little air entrainment as possible. When mixing, care must be taken to ensure that as little air as possible enters the mixture. Note: the resin component already contains an additive that promotes venting.

    We recommend covering the casting to prevent dust from entering (the surface of the casting must not be touched). If necessary, the curing process can be accelerated by a slight application of heat after allowing the casting to rest overnight.

    Epoxy Casting Resin (EXTRA 600) + Hardener, kit/ 2.84 kg

    R&G

    (2 kg canister Resin + 840 g bottle Hardener)

    Item no.  107104-AP-4 6 in stock  (delivery time 1-2 days)

    Add to Shopping List

    51,79 
    77,30 
    (Base Price 18,24 € /  kg)
    - +

    all Prices  price incl. VAT, possibly plus shipping

    Article information

    type: ga
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Instructions for use
    type: si
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    MSDS
    type: pi
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Product information
    type: td
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    type:
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]

    Videos

    Hazards identification - Epoxy Casting Resin EXTRA 600

    Hazard components for labelling

    reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight <= 700)

    Signal word: Danger

    Pictograms:

    GHS07 GHS09

    Hazard statements

    H315 Causes skin irritation.
    H317 May cause an allergic skin reaction.
    H319 Causes serious eye irritation.
    H411 Toxic to aquatic life with long lasting effects.

    Precautionary statements

    P262 Do not get in eyes, on skin, or on clothing.
    P273 Avoid release to the environment.
    P280 Wear protective gloves / protective clothing / eye protection / face protection.
    P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
    P333 P313 If skin irritation or a rash occurs: Get medical advice / attention.
    P501 Dispose of waste according to applicable legislation.

    Special labelling of certain mixtures

    EUH205 Contains epoxy constituents. May produce an allergic reaction.

    Hazards identification - Hardener EXTRA 600

    Hazard components for labelling

    Polyoxypropylenediamine

    Signal word: Danger

    Pictograms:

    GHS05

    Hazard statements

    H314 Causes severe skin burns and eye damage.
    H412 Harmful to aquatic life with long lasting effects

    Precautionary statements

    P303 P361 P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
    P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
    P310 Immediately call a POISON CENTER or doctor / physician.
    P363 Wash contaminated clothing before reuse.
    P405 Store locked up.
    P501 Dispose of waste according to applicable legislation.