Epoxy Casting Resin OCEAN BLUE (transparent)

    Single packs:
    5, 10 and 25 kg

    Epoxy Casting Resin OCEAN BLUE (transparent)

    Assortment adjustment. This discontinued item is qualitatively perfect goods without defects. Sale while stocks last.

    Resin component for Epoxy Casting Resin System OCEAN BLUE

    (processing with Hardener W 300)

    • Transparent components
    • Good UV resistance
    • Largely free of air bubbles
    • Polishable, hard surface
    • Very good impact strength
    • Low shrinkage
    • Can be modified with all kinds of fillers (metal powder, effect pigments, dry sand, etc.)
    • Also suitable for coatings and as laminating resin system with very long pot life

    Mixing ratio:
    100 : 35
    parts by weight of resin to hardener

    Pot life (135 g / 20 °C (68 °F)): approx. 300 minutes
    Curing time: approx. 24–72 h (depending on volume, layer thickness and temperature)

    Aquaristics, terraristics, arts and crafts, wood finishing, furniture construction (Rivertable), slides, aircraft, ship, car, and railway model construction.

    For optimum results, resin and hardener should be dosed by weight.
    (Mixing ratio by weight is not equal to mixing ratio by volume due to different specific weights of resin and hardener.)

    After mixing the resin and hardener, the casting resin must be poured into the mould as quickly as possible to avoid an
    exothermic reaction in the mixing vessel. This is especially true when larger quantities are processed.

    The reaction heat (exothermic) generated during hardening limits the maximum quantity to be poured in one operation and the
    layer thickness.
    The higher the temperature and/or layer thickness and/or volume, the shorter the processing/gelling time.
    If a certain limit is exceeded, the resin system heats up exponentially until undesired reactions finally occur:
    The casting discolours completely or in places, from light yellow to dark brown, cracks appear and increased shrinkage occurs.
    Furthermore, a restless, wavy surface is formed. In extreme cases, the casting can "boil" completely or partially. Temperatures
    above 100 °C then occur.

    Layer thicknesses up to 5 cm for small volumes up to approx. 500 ml and layers from 1-2 cm for large volumes up to
    approx. 30 liters can be cast.

    Large moulded parts ("river tables" etc.) with layer thicknesses of more than 20 mm should be cast in two or more work steps/
    layers one after the other at intervals of about 12 hours.

    At temperatures above 25 °C (77 °F), we strongly advise against casting larger layer thicknesses and/or larger volumes
    in one operation.

    Please order Hardener W 300 separately.

    Further information R&G eWiki

    Epoxy Casting Resin (ocean blue) canister/ 5 kg


    required hardener quantity: 1.75 kg Hardener W 300

    Item no.  107106-BT-4 Only 1 left in stock  (delivery time 1-2 days)

    Add to Shopping List

    (Base Price 9,76 € /  kg)
    - +

    Epoxy Casting Resin (ocean blue) canister/ 10 kg


    required hardener quantity: 3.5 kg Hardener W 300

    Item no.  107106-BT-5 Only 1 left in stock  (delivery time 1-2 days)

    Add to Shopping List

    (Base Price 9,24 € /  kg)
    - +

    Epoxy Casting Resin (ocean blue) canister/ 25 kg


    required hardener quantity: 8.75 kg Hardener W 300

    Item no.  107106-BT-6 Will be produced after receiving your order

    Add to Shopping List

    (Base Price 8,03 € /  kg)
    - +

    all Prices  price incl. VAT, possibly plus shipping

    Article information

    type: ga
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Instructions for use
    type: si
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    type: pi
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Product information
    type: td
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]


    Hazards identification - Epoxy Casting Resin OCEAN BLUE (transparent)

    Hazard components for labelling

    Reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight <= 700)
    Phenol, polymer with formaldehyde, glycidyl ether

    Signal word: Warning


    GHS07 GHS09

    Hazard statements

    H315 Causes skin irritation.
    H317 May cause an allergic skin reaction.
    H319 Causes serious eye irritation.
    H411 Toxic to aquatic life with long lasting effects.

    Precautionary statements

    P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    P273 Avoid release to the environment.
    P280 Wear protective gloves / protective clothing / eye protection / face protection.
    P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

    Special labelling of certain mixtures

    EUH205 Contains epoxy constituents. May produce an allergic reaction.