Presto SF Light Filler styrene-free

    set of two components, 420 + 1000 g, styrene-free

    Presto SF Light Filler styrene-free

    Presto SF Light Filler "styrene-free" has, due to the use of novel fillers, a density lower than 1 kg / dm³. That means, that the weight of the Light Filler is only half as high as conventional fillers. Therefore you can use it on objects, which shall not be loaded with high weight.

    • Composition of highly-reactive, unsaturated polyester resin with a combination of mineral and synthetic fillers
    • Special elasticity allows the use of objects which are exposed e.g. to high friction or vibrations, even during low temperatures
    • The contents of 420g correspond to a volume of 500ml
    • Results in a very smooth surface
    • Ease of working
    • Easy to sand
    • Very good adhesion
    • Free of asbestos and silicone
    • Resistant to weak acids and bases, propellants, solvents, water, and de-icing salt

    Applications:

    Car bodies are even made of plastic. Re-working of weld seams and folds. In boat building, during repair of boats and surfboards. In model making or repairing powder coatings.


    Technical data:
    Basis:
    Polyester resin with mineral and synthetic fillers
    Colour: White
    Consistency: Soft, thixotropic, pasty
    Processing time (at 20 °C): approx. 8 - 9 Min.
    Processing temperature: min. 12 °C
    Drying time (at 20°C, 50% relative air humidity): -> can be sanded after: approx. 40 minutes
    Flashpoint: approx. 33 °C (resin); not applicable for hardener
    Density (at 20 °C): Putty: 0,85 g/cm³, hardener: 1,15 g/cm³
    Addition of hardener: 2 - 4 % (optimal mixture 2,5 %)
    Temperature resistance of the cured material: 180 °C, short-term up to 200 °C

    Storage stability:
    18 months if appropriate storage is provided (=10°-25°C, relative air humidity of max. 60%) in the unopened original container. Protect from direct sunlight, frost, and humidity.

    Presto SF Light Filler styrene-free, pack/ 420 g

    Presto

    (408 g putty + 12 g hardener)

    Item no.  160107-SF-1 26 in stock  (delivery time 1-2 days)

    Add to Shopping List

    21,44 
    (Base Price 51,05 € /  kg)

    Scaled Price

    • From Qty 2:  5,0%
    • From Qty 4:  10,0%
    • From Qty 6:  15,0%
    • From Qty 12:  20,0%
    - +

    all Prices  price incl. VAT, possibly plus shipping

    Article information

    type: ga
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Instructions for use
    type: si
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    MSDS
    type: pi
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Product information
    type: td
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    type:
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]

    Hazards identification - Presto Filler styrene-free comp. A (filler)

    Hazard components for labelling

    Vinyltoluene
    barium sulphate, natural
    1,4-dihydroxybenzene

    Signal word: Warning

    Pictograms:

    GHS02 GHS07

    Hazard statements

    H226 Flammable liquid and vapour.
    H315 Causes skin irritation.
    H319 Causes serious eye irritation.

    Precautionary statements

    P101 If medical advice is needed, have product container or label at hand.
    P102 Keep out of reach of children.
    P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    P264 Wash hands thoroughly after handling.
    P280 Wear protective gloves / protective clothing / eye protection / face protection.
    P302 P352 IF ON SKIN: Wash with plenty of water.
    P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
    P332 P313 If skin irritation occurs: Get medical advice / attention.
    P403 P233 Store in a well ventilated place. Keep container tightly closed.
    P501 Dispose of waste according to applicable legislation.

    Hazards identification - Hardener paste for filler (comp. B)

    Hazard components for labelling

    dibenzoyl peroxide

    Pictograms:

    GHS02 GHS07 GHS09

    Hazard statements

    H242 Heating may cause a fire.
    H317 May cause an allergic skin reaction.
    H319 Causes serious eye irritation.
    H410 Very toxic to aquatic life with long lasting effects.

    Precautionary statements

    P101 If medical advice is needed, have product container or label at hand.
    P102 Keep out of reach of children.
    P280 Wear protective gloves / protective clothing / eye protection / face protection.
    P302 P352 IF ON SKIN: Wash with plenty of water.
    P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
    P403 P235 Store in a well ventilated place. Keep cool.
    P501 Dispose of waste according to applicable legislation.