Jump to search bar Jump to navigation Jump to the main content
Silicone rubber ADDV-EX (set of two components), 1 kg

Silicone rubber ADDV-EX (set of two components), 1 kg

Very soft, addition-curing RTV-2 silicone rubber for high-detail moulding and models with pronounced undercuts.

ADDV-EX is a low-viscosity, two-component platinum-cure silicone with a hardness of Shore 00 55 ± 4. It combines high elongation with good tear resistance and is suitable for mould making, model making and special effects. The mixing ratio is 1 : 1, with a curing time of approximately 1.5 hours at 23 °C.

Product properties

  • Very soft and flexible: 550% elongation at break for demoulding complex geometries and pronounced undercuts.
  • High detail reproduction: Low mixed viscosity of 1,500 mPa·s for reproducing fine surface structures.
  • Tear-resistant: Tear strength of 15 ± 1 N/mm.
  • Simple mixing ratio: 1 : 1 for both components.
  • Fast curing: Approx. 1.5 hours at 23 °C.
  • Dimensionally stable: Low shrinkage of approx. 0.05% after 24 hours.
  • Colourable: Milky translucent silicone that can be coloured with suitable pigments or pigment pastes.

Applications

ADDV-EX is particularly suitable for high-detail reproductions and flexible moulds with pronounced undercuts. This very soft silicone enables realistic reproductions of complex objects and body parts, for example for special effects (SFX).

Other applications include mould making, model making, cosmetics, medical foot care and the manufacture of toys and silicone products intended for close body contact.

Technical data

Silicone type Addition-curing RTV-2 silicone rubber (platinum-cure silicone)
Mixing ratio 1 : 1
Colour Milky translucent
Mixed viscosity (23 °C) 1,500 mPa·s
Hardness Shore 00 55 ± 4
Density 1.06 g/cm³
Working time (23 °C) Approx. 10 minutes
Curing time (23 °C) Approx. 1.5 hours
Tensile strength 1.07 N/mm²
Elongation at break 550%
Tear strength (Die B) 15 ± 1 N/mm
Shrinkage (24 h, 23 °C) Approx. 0.05%
Temperature resistance, continuous −40 to +200 °C
Temperature resistance, short-term −45 to +220 °C
Processing and curing

Processing

Thoroughly mix both components at a ratio of 1 : 1 and pour the mixture within the working time of approximately 10 minutes. For high-detail moulds, pour slowly and evenly to minimise trapped air.

Curing times at different temperatures

Below 10 °C Very little curing
23 °C Approx. 1.5 hours
50 °C Approx. 15 minutes
150 °C Approx. 30 seconds

Avoiding cure inhibition

Certain materials may interfere with the addition-curing reaction. Avoid contact with sulphur, halogens, latex, epoxy and polyester resins, certain silicones, polyurethane rubber, EPDM, alumina, incompatible modelling clays and certain plasticisers.

According to the manufacturer, 3D-printed PLA models do not present a problem. UV resin models must be thoroughly cleaned with isopropyl alcohol and fully post-cured under UV light. Preliminary compatibility testing is recommended for unfamiliar materials.

Material compatibility and additional properties

The cured silicone offers good release properties, chemical resistance and ageing resistance. According to the manufacturer, it is odourless and tasteless.

ADDV-EX is suitable for moulding and applications involving plaster, wax, polyurethane and acrylic plastics. Metal, glass and ceramic surfaces can be pretreated with MM4 primer to achieve permanent adhesion of the silicone.

Skin and mucous membrane contact: According to the manufacturer, products made from the cured silicone are suitable for direct contact with skin and mucous membranes. Applications subject to specific medical or regulatory requirements require separate verification of the relevant suitability documentation.

Storage

Store in dry conditions, protected from UV light, at 5–25 °C. According to the manufacturer, the shelf life is approximately 18 months from the production date when stored correctly.

Amazon Pay Apple Pay Visa Card Mastercard PayPal SEPA
 
R&G

Silicone Rubber ADDV-EX, kit/ 1 kg (0)

New

500 g Component A + 500 g Component B

Item no.  4154601 100 in stock  (delivery time 1-2 days)

Add to Shopping List
55,60 €
(Base Price 55,60 € /  kg )

Scaled Price

  • From Qty 2:  5,00%
  • From Qty 5:  10,00%

all Prices  price incl. VAT, possibly plus shipping

Article information

type: ga
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Instructions for use
type: si
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
MSDS
type: pi
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Product information
type: td
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
type:
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]

Hazards identification - ADDV-EX component A

Classification of the substance or mixture

The product is not classified according to the CLP regulation.
Labelling according to Regulation (EC) No 1272/2008: Void
Hazard pictograms: Void
Signal word: Void
Hazard statements: Void

Signal word: n/a

Hazards identification - ADDV-EX component B

Classification of the substance or mixture

The product is not classified according to the CLP regulation.
Labelling according to Regulation (EC) No 1272/2008: Void
Hazard pictograms: Void
Signal word: Void
Hazard statements: Void

Signal word: n/a