Jump to search bar Jump to navigation Jump to the main content
TeXtreme® Carbon fabric 80 g/m² (plain, ± 45 °, HT), width 127 cm

TeXtreme® Carbon fabric 80 g/m² (plain, ± 45 °, HT), width 127 cm

USA: width 50", weight 2.8 oz/yd²

TeXtreme® Biaxial carbon fibre fabric with ±45° fibre orientation for CFRP components subjected to shear and torsional loads.

The 20 mm wide spread-tow fibre tapes form a flat fabric structure with low fibre crimp. The ±45° orientation enables torsion-resistant laminate plies without diagonally cutting conventional 0°/90° fabrics, thereby reducing material waste. An epoxy binder stabilises the fabric during cutting and lay-up.

Product properties

  • Low areal weight: 80 g/m² for lightweight CFRP laminates.
  • ±45° fibre orientation: For laminate structures subjected to shear and torsional loads.
  • Spread-tow technology: Flat fibre tapes with low fibre crimp.
  • Reduced cutting waste: Torsional plies without diagonally cutting a 0°/90° fabric.
  • Uniform surface structure: Also suitable for components with a visible carbon fibre surface.
  • Stabilised fabric structure: Facilitates cutting and lay-up.

Note on usable width: Due to the manufacturing process, an edge section approximately 5 cm wide has an irregular weave. The actual usable fabric width is approximately 117–122 cm. This should be taken into account when planning cutting layouts.

Comparison of carbon fibre types used by R&G for TeXtreme® fabrics

Property HT – This fabric HT
Fibre type Torayca® T700SC 12K, 800 tex Tenax® UTS50 12K, 800 tex
Tensile strength (MPa) 4,900 4,800
Tensile modulus (GPa) 230 240
Elongation at break (%) 2.1 2.0
Density (g/cm³) 1.8 1.79

The values refer to the carbon fibres themselves, not to the finished CFRP laminate. Its properties also depend on fibre orientation, fibre volume fraction, resin system and manufacturing process.

Technical data
Product TeXtreme® Biaxial Spread Tow Fabric
Areal weight 80 g/m²
Fibre orientation ±45°
Weave Plain weave
Nominal fabric width 127 cm
Actual usable width Approx. 117–122 cm
Fibre tape width 20 mm
Binder Epoxy binder
Additional binder weight Approx. 10 g/m² (subject to confirmation)
Binder softening From approx. 18 °C
Applications and processing

Typical applications

  • ±45° plies in multi-layer CFRP laminates
  • Weight-optimised structural components
  • Sports equipment, model making and technical composite components
  • Components with visible carbon fibre surfaces

Processing

The binder begins to soften at approximately 18 °C. Ensure complete impregnation and laminate consolidation appropriate to the component during processing.

Calculated laminate values

Indicative values at a fibre volume fraction of 35%:

Resin consumption Approx. 96 g/m²
Laminate thickness Approx. 0.13 mm
Laminate weight Approx. 176 g/m²

These values are calculated estimates excluding the additional binder content. Actual resin consumption and laminate thickness depend on the processing method and fibre volume fraction.

Storage and delivery information

Storage

Store in dry, well-ventilated conditions at 0–30 °C. Keep the roll free from pressure, for example on a roll stand or with the roll core properly supported.

When transported, processed and stored correctly, the shelf life stated by R&G is two years from delivery.

Delivery information

The fabric is supplied with an interleaving film to prevent adjacent fabric layers from sticking together and to protect the fabric structure.

Further information

Manufacturer Oxeon's defect classification (PDF)

Amazon Pay Apple Pay Visa Card Mastercard PayPal SEPA
 
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 0.5 m (0)

New

(surface area = 0.635 m²)

Item no.  TX-190263-45-127-0 Delivery time on request

Add to Shopping List
52,81 €
(Base Price 83,17 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 1 m (0)

New

(surface area = 1.27 m²)

Item no.  TX-190263-45-127-1 Delivery time on request

Add to Shopping List
99,08 €
(Base Price 78,02 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 2 m (0)

New

(surface area = 2.54 m²)

Item no.  TX-190263-45-127-2 Delivery time on request

Add to Shopping List
187,20 €
(Base Price 73,70 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 3 m (0)

New

(surface area = 3.81 m²)

Item no.  TX-190263-45-127-3 Delivery time on request

Add to Shopping List
270,05 €
(Base Price 70,88 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 5 m (0)

New

(surface area = 6,35 m²)

Item no.  TX-190263-45-127-5 Delivery time on request

Add to Shopping List
434,42 €
(Base Price 68,41 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 10 m (0)

New

(surface area = 12.7 m²)

Item no.  TX-190263-45-127-6 Delivery time on request

Add to Shopping List
832,06 €
(Base Price 65,52 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 20 m (0)

New

(surface area = 25.4 m²)

Item no.  TX-190263-45-127-7 Delivery time on request

Add to Shopping List
1.556,85 €
(Base Price 61,29 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
Textreme

TeXtreme® Carbon fabric 80 g/m² (± 45°, plain weave, HT) 127 cm, roll/ 50 m (0)

New

(surface area = 63.5 m²)

Item no.  TX-190263-45-127-8 Delivery time on request

Add to Shopping List
3.719,48 €
(Base Price 58,57 € /  m² )

Scaled Price

  • From Qty 2:  5,00%
  • From Qty 3:  10,00%

all Prices  price incl. VAT, possibly plus shipping

Article information

type: ga
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Instructions for use
type: si
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
MSDS
type: pi
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Product information
type: td
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
type:
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]

Hazards identification - TeXtreme® Carbon fabric 80 g/m² (plain, ± 45 °, HT), width 127 cm

Signal word: Warning

Pictograms:

GHS07

Hazard statements

Precautionary statements H-statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.

Precautionary statements

Precautionary statements P-statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P333 P313 If skin irritation or a rash occurs: Get medical advice / attention.
P501 Dispose of waste according to applicable legislation.