0.75, 1.5, 3, 7.5 and 20 kg
The well-proven R&G Epoxy Resin L in combination with Hardener GL 1 offers an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
100 : 30 parts by weight resin : hardener
100 : 35 parts by volume resin : hardener
Processing time: approx. 30 minutes
This newly developed resin system is ideal for wetting-out glass, aramid and carbon fibres. It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
The resin component itself is absolutely free of crystallization due to its Bisphenol A/F base! The resin system is ambient curing and develops no distinctive brittleness even at curing temperatures below 20 °C. We however recommend, to improve the physical and chemical properties, to perform a post-curing at least at 40 °C over 15 h.
Mixing table with processing times of Epoxy Resin L + mixed Hardeners GL 1/2.
The mixing ratio of 100 : 30 resin to hardener remains unchanged.
|approx. pot life in minutes
(100 g at 23 °C with epoxy L)
Please order Epoxy Resin L order no. 100135-X separately
all Prices price incl. VAT, possibly plus shipping
Hazard components for labelling3-aminomethyl-3,5,5-trimethylcyclohexylamine
Signal word: Danger
|H302||Harmful if swallowed.|
|H314||Causes severe skin burns and eye damage.|
|H317||May cause an allergic skin reaction.|
|H318||Causes serious eye damage.|
|H361d||Suspected of damaging the unborn child.|
|H412||Harmful to aquatic life with long lasting effects|
|P260||Do not breathe dust / fume / gas / mist / vapours / spray.|
|P303 P361 P353||IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.|
|P310||Immediately call a POISON CENTER or doctor / physician.|
|P405||Store locked up.|
|P501||Dispose of waste according to applicable legislation.|