Epoxy Resin EPIKOTE™ LR 285 + Hardener LH 285 (50 min / Aero)

Low viscosity, free of solvents and fillers for impregnating glass, aramid and carbon fibres.

Approved for the construction and repair of gliders and powered aircraft.
Laminate structures for vehicle construction in combination with hardener 285 are approved by the TÜV-Süd (Document available in german language only).

Mixing ratio:
100 : 40 parts by weight of epoxy : hardener

Processing time: 50 minutes

Curing time: 24 hours at room temperature, followed by warm curing for 15 hours at 55 °C (recommended)

For further technical data and detailed information on processing, please refer to the comprehensive PDF "Technical Information on System L 285" (to be found in the appendix under "Article Information").

Former brand names: Hexion^®, Bakelite^®

all Prices price incl. VAT, possibly plus shipping

Article information

MSDS Epoxy resin EPIKOTE™ Resin MGS™ LR285 (PDF)

MSDS Hardener EPIKURE™ Curing Agent MGS™ LH285 (PDF)

Technical Information on System L 285 (PDF)

Videos

Hazards identification - Epoxy Resin EPIKOTE™ Resin MGS™ LR285

Hazard components for labelling

bis-[4-(2,3-epoxipropoxi)phenyl]propane
1,2,3-Propanetriol, polymer with 2-(chloromethyl)oxirane

Signal word: Warning

Pictograms:

Hazard statements

H302	Harmful if swallowed.
H315	Causes skin irritation.
H317	May cause an allergic skin reaction.
H319	Causes serious eye irritation.
H411	Toxic to aquatic life with long lasting effects.

Precautionary statements

P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P264	Wash hands thoroughly after handling.
P270	Do no eat, drink or smoke when using this product.
P273	Avoid release to the environment.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P302 P352	IF ON SKIN: Wash with plenty of water.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P333 P313	If skin irritation or a rash occurs: Get medical advice / attention.
P337 P313	If eye irritation persists: Get medical advice / attention.
P362 P364	Take off contaminated clothing and wash it before reuse.
P391	Collect spillage.
P501	Dispose of waste according to applicable legislation.

Hazards identification - Hardener EPIKURE™ LH285 (50 min/Aero)

Hazard components for labelling

3-aminomethyl-3,5,5-trimethylcyclohexylamine
benzyl alcohol
nonylphenol

Signal word: Danger

Pictograms:

Hazard statements

H302	Harmful if swallowed.
H314	Causes severe skin burns and eye damage.
H317	May cause an allergic skin reaction.
H411	Toxic to aquatic life with long lasting effects.

Precautionary statements

P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P264	Wash hands thoroughly after handling.
P270	Do no eat, drink or smoke when using this product.
P273	Avoid release to the environment.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P301 P330 P331	IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 P361 P353 P310	IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor.
P304 P310	IF INHALED: Immediately call a POISON CENTER or doctor.
P305 P351 P338 P310	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor / physician.
P308 P311	IF exposed or concerned: Call a POISON CENTER or doctor / physician.
P333 P313	If skin irritation or a rash occurs: Get medical advice / attention.
P363	Wash contaminated clothing before reuse.
P391	Collect spillage.