Hardener P-25 (for Mould Resin P / 20 min)

Hardener for Mould Resin P with a pot life of 20 minutes.

Excellent chemical resistance (as far as possible styrene-resistant)
Free of nonylphenol and benzyl alcohol

Mixing ratio: 100 : 25 parts by weight of resin to hardener
Processing time (125 g/23 °C): approx. 20 minutes
Gel time (at 20 °C/1 mm layer thickness): approx. 2 hours
Curing time (at 23 °C): 24 hours

Viscosity (ISO 3219/at 25 °C): 150 -170 mPas
Flashpoint (DIN-ISO 367): > 100 °C
Amine number (TS 31-97): 825 ± 50 mgKOH/g
Gardner colour index (DIN ISO 4630-2): < 8
Amine-Equivalent weight (calculated): 44 g/Eq.
Solid content: 100 %

Please order Mould Resin P (Item no.115160-X) separately.

all Prices price incl. VAT, possibly plus shipping

Article information

MSDS Hardener P-25 (PDF)

Hazards identification - Hardener P-25 (for Mould Resin P / 20 min)

Signal word: Danger

Pictograms:

Hazard statements

H302	Harmful if swallowed.
H314	Causes severe skin burns and eye damage.
H317	May cause an allergic skin reaction.
H412	Harmful to aquatic life with long lasting effects

Precautionary statements

P260	Do not breathe dust / fume / gas / mist / vapours / spray.
P303 P361 P353	IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310	Immediately call a POISON CENTER or doctor / physician.
P405	Store locked up.
P501	Dispose of waste according to applicable legislation.