Rigid PU Foam H75-AT (comp. A), 0.7 kg

    For commercial custommers only

    Rigid PU Foam H75-AT (comp. A), 0.7 kg

    The Chemicals Ban Ordinance prohibits the sale of this product to private end consumers. Unfortunately, sales are only possible to resellers, professional users and public research, investigation and educational institutions. We regret this very much but ask for your understanding that we must comply with the legal prohibition.

    PU structural foam H75-AT is a closed-pore 2-component rigid foam that hardens on the surface when foamed into moulds with poreless skin.

    PU structural foam H75-AT is foamed with hardener TYPE 2 and is resistant to diluted acids, alkalis and water. Due to its long starting time and its mixing ratio, this foam can also be easily processed by hand. With mechanical foaming, the volume weight and start time are reduced; with foaming in closed moulds, an increase in the shot quantity leads to an increase in the density and pressure on the mould walls.

    It has a cup density of approx. 75 kg/m³.

    Production of highly stressed moulded parts with poreless skin, such as precision parts, reliefs, figures, decorations, lids, bowls and parts in model making.

    For the mixing of the PU foam and the hardener max. 40 seconds are available. As soon as the mixture starts to react (foaming), it may not be stirred anymore, because otherwise the foam structure will be destroyed. The cured foam will lose its compressive strength and becomes brittle.

    Colour: Yellowish
    Specific weight at 20 °C: 1.1 g/cm³
    Viscosity at 20°C: 1900 mPa.s

    Material data of the mixture (PU foam + hardener) at 20 °C:

    Mixing ratio:
    Parts by weight PU foam : hardener: 100: 145

    Start time: 60 seconds
    Setting time: 150 seconds
    Rise time: 220 seconds

    Consumption: approx. 75 g/l

    Material data of the cured product:

    Density: approx. 75 kg/m³
    Expansion: 1 : 13

    Resistant to storage in light gasoline, mineral oil, diesel fuel, aliphatic hydrocarbons, diluted acids and alkalis, water, seawater and soil; brown colouring on the surface over time in weathering.

    PU Rigid Foam H75-AT (component A) can/ 0.7 kg


    Item no.  1263150 Only 2 left in stock, more on the way  (delivery time 1-2 days)

    Add to Shopping List

    (Base Price 32,46 € /  kg)

    Scaled Price

    • From Qty 2:  5,0%
    - +

    all Prices  price incl. VAT, possibly plus shipping

    Article information

    type: ga
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Instructions for use
    type: si
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    type: pi
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Product information
    type: td
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]

    Hazards identification - Rigid PU Foam H75-AT (comp. A), 0.7 kg

    Hazard components for labelling

    Propane-1,2-diol, propoxylated

    Signal word: Warning



    Hazard statements

    H315 Causes skin irritation.
    H319 Causes serious eye irritation.

    Precautionary statements

    P101 If medical advice is needed, have product container or label at hand.
    P102 Keep out of reach of children.
    P280 Wear protective gloves / protective clothing / eye protection / face protection.
    P302 P352 IF ON SKIN: Wash with plenty of water.
    P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
    P332 P313 If skin irritation occurs: Get medical advice / attention.
    P337 P313 If eye irritation persists: Get medical advice / attention.
    P501 Dispose of waste according to applicable legislation.