Epoxy Minute Adhesive (MR 1:1) double cartridge, 50 g

    Mixing ratio 1:1
    <5 minutes

    Epoxy Minute Adhesive (MR 1:1) double cartridge, 50 g

    Fast-setting two-component epoxy resin adhesive for wood, metal, ceramics, rigid foams and many plastics.

    • High bond strength
    • Tough-hard formulation
    • Free of solvents and fillers

    Processing time: 5 minutes
    Loads can be applied after: 10 minutes

    Processing:
    The compound can also be used to fill gaps, but in general the thinner the glued bond, the higher the lap shear strength.
    The components are dosed in the ratio 1 : 1 with the dosing gun for 50 ml double cartridges (MR 1:1) and the constituents mixed through the mixing tube for double syringes and cartridges (MR 1:1). Purity and simple handling are ensured. This contributes towards considerable cost savings in particular in series production.

    The epoxy minute adhesive is not identical to the R&G 5 Minute Epoxy, but it does exhibit similar properties and mechanical values with increased elongation at break.

    Please order mixing tube for double syringes and cartridges (order no. 155164) and dosing gun for 50 ml double cartridges separately

    Epoxy minute adhesive, double cartridge/ 50 g

    R&G

    Item no.  1551161 Only 8 left in stock, more on the way  (delivery time 1-2 days)

    Add to Shopping List

    10,71 
    (Base Price 214,20 € /  kg)

    Scaled Price

    • From Qty 2:  5,0%
    • From Qty 6:  10,0%
    • From Qty 12:  15,0%
    • From Qty 24:  20,0%
    • From Qty 48:  25,0%
    • From Qty 96:  30,0%
    - +

    all Prices  price incl. VAT, possibly plus shipping

    Article information

    type: ga
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Instructions for use
    type: si
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    MSDS
    type: pi
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    Product information
    type: td
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]
    type:
    language: [language]
    info3: [info3]
    filetype: [filetype]
    url: [url]

    Hazards identification - Epoxy Minute Adhesive Resin

    Hazard components for labelling

    Reaction product: bisphenol-A-(epichlorhydrin) Epoxy resin (number average molecular weight ≤ 700)

    Signal word: Warning

    Pictograms:

    GHS07 GHS09

    Hazard statements

    H315 Causes skin irritation.
    H317 May cause an allergic skin reaction.
    H319 Causes serious eye irritation.
    H411 Toxic to aquatic life with long lasting effects.

    Precautionary statements

    P101 If medical advice is needed, have product container or label at hand.
    P102 Keep out of reach of children.
    P280 Wear protective gloves / protective clothing / eye protection / face protection.
    P333 P313 If skin irritation or a rash occurs: Get medical advice / attention.
    P337 P313 If eye irritation persists: Get medical advice / attention.
    P501 Dispose of waste according to applicable legislation.

    Hazards identification - Epoxy Minute Adhesive Hardener

    Hazard components for labelling

    Triethylenetetramine

    Signal word: Danger

    Pictograms:

    GHS05 GHS07

    Hazard statements

    H314 Causes severe skin burns and eye damage.
    H317 May cause an allergic skin reaction.

    Precautionary statements

    P101 If medical advice is needed, have product container or label at hand.
    P102 Keep out of reach of children.
    P280 Wear protective gloves / protective clothing / eye protection / face protection.
    P301 P330 P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
    P303 P361 P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
    P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
    P310 Immediately call a POISON CENTER or doctor / physician.
    P405 Store locked up.
    P501 Dispose of waste according to applicable legislation.