Single packs:
500 g, 1 and 25 kg

15 Minute Epoxy (Resin)

Resin component for 15-Minute Epoxy – for fast, reliable bonding of different materials.
Matching resin component for the fast-curing, solvent-free and filler-free two-component epoxy adhesive 15-Minute Epoxy. When combined with the corresponding hardener component, the adhesive system has a mixing ratio of 1 : 1 and a working time of 15–20 minutes.

Properties and Applications

The resin component is intended for use with the corresponding hardener component of 15-Minute Epoxy. The mixed adhesive has a honey-like, viscous consistency, allowing controlled application and careful positioning of components.

The epoxy adhesive is suitable for bonding GRP, CFRP, metal, wood, stone, suitable rigid foams and numerous plastics. Typical applications include assembly and repair work in model making, mould making and on composite components. Once fully cured, the tough-hard adhesive bond can be sanded.

Processing

Thoroughly mix the resin component only with the designated hardener component at the specified mixing ratio of 1 : 1. Follow the product-specific dosing instructions by weight or volume.

The bonding surfaces must be clean, dry, sound and free from grease, dust and release agents. Smooth surfaces can be abraded where appropriate. For GRP and CFRP laminates, bonding surfaces prepared using suitable peel ply are also possible.

Apply the mixed adhesive evenly, join and align the components, and secure them against movement during curing. The reaction rate depends on temperature and the quantity mixed. Larger batches may generate more heat due to the exothermic reaction and consequently cure faster.

Important Application Notes

Compatibility: Use only with the corresponding hardener component of 15-Minute Epoxy. The resin component cannot be used as an adhesive on its own.
Non-sag properties: The limited non-sag properties of the mixed adhesive must be taken into account when bonding larger gaps or vertical surfaces.
Difficult-to-bond plastics: PE, PP and PTFE generally cannot be bonded reliably without special surface treatment.
UV resistance: Prolonged UV exposure and natural ageing may cause the cured adhesive bond to yellow or darken.

Technical Properties of the Adhesive System

Product type	Resin for two-component epoxy adhesive
Pack type	Resin component, supplied separately
Mixing ratio	1 : 1 (with corresponding hardener component)
Working time	15–20 minutes
Consistency	Honey-like, viscous (when mixed)
Properties after curing	Tough-hard, sandable

Note: This product contains only the resin component. The corresponding hardener component is available separately.

15 Minute Epoxy (Resin) bottle/ 500 g

required hardener quantity: 500 g 15 Minute Epoxy (Hardener)

Item no. 1561052 Short delivery time

Add to Shopping List

12,48 €

(Base Price 24,96 € / kg )

15 Minute Epoxy (Resin) bottle/ 1 kg

required hardener quantity: 1 kg 15 Minute Epoxy (Hardener)

Item no. 1561053 Short delivery time

Add to Shopping List

20,96 €

(Base Price 20,96 € / kg )

Scaled Price

From Qty 3: 5,00%
From Qty 5: 10,00%
From Qty 10: 15,00%

15 Minute Epoxy (Resin) canister/ 25 kg

required hardener quantity: 25 kg 15 Minute Epoxy (Hardener)

Item no. 1561056 Short delivery time

Add to Shopping List

330,86 €

(Base Price 13,23 € / kg )

all Prices price incl. VAT, possibly plus shipping

Article information

MSDS 15 Minutes epoxy (resin) (PDF)

SafetyData Sheet 15 Minutes epoxy (hardener) (PDF)

Technical Data Sheet + Processing informations 15 Minutes epoxy (PDF)

Hazards identification - 15 Minute Epoxy Resin

Hazard components for labelling

2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] bisoxirane
Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4- (oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2'-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane

Signal word: Warning

Pictograms:

Hazard statements

Precautionary statements	H-statements
H315	Causes skin irritation.
H317	May cause an allergic skin reaction.
H319	Causes serious eye irritation.
H411	Toxic to aquatic life with long lasting effects.

Precautionary statements

Precautionary statements	P-statements
P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P273	Avoid release to the environment.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

Special labelling of certain mixtures

EUH205

Contains epoxy constituents. May produce an allergic reaction.

Hazards identification - 15 Minute Epoxy Hardener

Hazard components for labelling

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane, reaction products with m-
Reaction mass of (1-phenylethyl)phenols and bis(1-phenylethyl)phenols
2,2,4(or 2,4,4)-trimethylhexane-1,6-diamine
1,3-benzenedimethanamine
benzyl alcohol

Signal word: Danger

Pictograms:

Hazard statements

Precautionary statements	H-statements
H302	Harmful if swallowed.
H314	Causes severe skin burns and eye damage.
H317	May cause an allergic skin reaction.
H411	Toxic to aquatic life with long lasting effects.

Precautionary statements

Precautionary statements	P-statements
P303 P361 P353	IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310	Immediately call a POISON CENTER or doctor / physician.
P321	Specific treatment (see information on this label).
P362 P364	Take off contaminated clothing and wash it before reuse.
P405	Store locked up.
P501	Dispose of waste according to applicable legislation.

Accessories

15 Minute Epoxy (Hardener)

Designer Protection googles Perspecta 9000, clear glasses

A white mannequin head wearing transparent safety glasses with blue temples.

Digital precision scale up to 600 g

A gloved hand holding a blue bottle on a digital scale.

Digital scale up to 20 kg

A hand wearing a glove places a paper cup on a digital scale. The display shows a weight of 180.189 grams. The scale has several buttons.

Digital scale up to 40 kg

A gloved hand holding a paper cup is placing it on a digital scale. The scale

Nitrile gloves SAFE PREMIUM

A person putting on white latex gloves, focusing on the hands and gloves.

Dispensing insert for R&G epoxy resin bottles

The image shows three transparent, circular plastic caps with a hole in the center, arranged on a white background.