A close-up of a roll of translucent yellow material, possibly plastic or film, on a light yellow background.

max. 150 °C
Elongation at break: approx. 500 %

Bagging film (PA/PE) YELLOW 65 my, width 200 cm

Highly stretchable, five-layer, coextruded vacuum film for vacuum infusion. Suitable for polyester and epoxy resins.

Thanks to its excellent stretchability, it can be easily used for various shapes. It also withstands high temperatures.

Very robust
Airtight
Pleasant, soft texture
Uniform thickness
Can stretch significantly under load

Technical data:
Material: PA (polyamide) and PE (polyethylene), five-layer construction: PA/PE/PA/PE/PA
Max. temperature: 150 °C
Thickness: 65 µm
Width: 200 cm
Dimensional stability: MD -1.9 %, TD -1.6 %
Tear strength: MD 9.7 N, TD 8.3 N
Elongation at break: MD ≥ 500 %, TD ≥ 450 %
Tensile modulus: MD ≥ 60.6 MPa, TD ≥ 68.9 MPa
Tensile strength: MD ≥ 443 MPa, TD ≥ 373 MPa
Colour: Yellow

Application:
Suitable for vacuum infusion. This film is often used in the manufacture of yachts, wind turbine blades, cabin covers, car body panels, hoods, helmets, and other components that require high strength and low weight.

Storage:
Protect from daylight/UV radiation, store at room temperature and at a humidity level of no less than 60%