Epoxy Resin L + Hardener CL (60 min)

Epoxy Resin L + Hardener CL (60 min)

Set of two components

The resin system Epoxy Resin L + Hardener CL yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres. It is especially suitable for carbon coating of automotive parts.

  • Low-viscous
  • High degree of UV stability
  • Tack-free curing even of thin layers
  • Glass transition temperature (Tg) > 90 °C (post-curing at 70 °C / 15 h)
  • High static and dynamic strength (equal to Epoxy Resin L 285 with Hardener 285)
  • Free of nonylphenol and DETA

Processing time: 60 minutes (100 g / 20 °C)

Mixing ratio:
100 : 30 parts by weight resin : hardener
100 : 35 parts by volume resin : hardener

The resin system is ambient curing and develops no distinctive brittleness even at curing temperatures below 20 °C (for at least 48 h). We however recommend, to improve the physical and chemical properties, to perform a post-curing at least at 40 °C over 15 h.

It exhibits a very good price/performance ratio and is suitable for the following processing procedures:

  • Hand laminating
  • Vacuum moulding
  • Press moulding

Mechanical properties (pure resin cured*) of Epoxy Resin L + Hardener CL

Flexural test

Flexural strength DIN EN ISO 178 in MPa 137
Surface strain at maximum stress 6.8 %
Surface strain (no specimen failure) 7 %
Flexural modulus 3220

Tensile test

Tensile strength (DIN EN ISO 527) in MPa 82.8
Elongation at maximum strain 4.9 %
Elongation at break 5.5 %
Tensile modulus in MPa 3190

Compression test

Compressive strength (DIN EN ISO 604) at 6 % compression

111

Shrinkage

Linear shrinkage (DIN EN 12617-1) 0.3 %

*at 1 h 23 °C + 5 h 70 °C + 5 h 80 °C)

CYTOX Expertise for the resin system Epoxy resin L + Hardener CL: this system is not cytotoxic (cell damaging), important for applications in medical purposes!

Please order Epoxy Resin L separately.

R&G

Epoxy Resin L + Hardener CL (60 min) kit/ 930 g

715 g resin L + 215 g hardener CL

Item no.  109285-AP-2 Only 16 left in stock, more on the way  (delivery time 1-2 days)

Add to Shopping List

26,01 
(Base Price 27,97 € /  kg)

Scaled Price

  • From Qty 2:  5,00%
  • From Qty 5:  10,00%
- +
R&G

Epoxy Resin L + Hardener CL (60 min) kit/ 3,25 kg

2,5 kg Resin L + 725 g Hardener CL

Item no.  109285-AP-3 Only 16 left in stock, more on the way  (delivery time 1-2 days)

Add to Shopping List

64,62 
(Base Price 19,88 € /  kg)

Scaled Price

  • From Qty 2:  5,00%
- +

all Prices  price incl. VAT, possibly plus shipping

Article information

type: ga
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Instructions for use
type: si
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
MSDS
type: pi
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Product information
type: td
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
type:
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]

Hazards identification - Epoxy Resin L

Hazard components for labelling

2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] bisoxirane
1,6-bis(2,3-epoxypropoxy)hexane
Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4- (oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2'-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane

Signal word: Warning

Pictograms:

GHS07 GHS09

Hazard statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
H412 Harmful to aquatic life with long lasting effects

Precautionary statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P501 Dispose of waste according to applicable legislation.

Special labelling of certain mixtures

EUH205 Contains epoxy constituents. May produce an allergic reaction.

Hazards identification - Hardener CL

Hazard components for labelling

3-aminomethyl-3,5,5-trimethylcyclohexylamine
Cyclohexanemethanamine, 5-amino-1,3,3-trimethyl-, reaction products with bisphenol A diglycidyl ether homopolymer
Benzyl alcohol

Signal word: Danger

Pictograms:

GHS05 GHS07

Hazard statements

H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects

Precautionary statements

P260 Do not breathe dust / fume / gas / mist / vapours / spray.
P303 P361 P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P310 Immediately call a POISON CENTER or doctor / physician.
P362 P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of waste according to applicable legislation.