MD POX 5 minutes epoxy adhesive (MR 1:1), 25 + 50 g

MD POX Epoxy adhesive 5 minutes is a very reactive chemical compound. After mixing, the two-component adhesive achieves extraordinary strength. For bonding metals, ceramics, glass, stone and many hard plastics. For many on-the-spot repairs with high quality and little effort.

• Achieves extremely high strength
• Universally applicable
• Weatherproof
• Also suitable as a casting compound
• Remains stiffly flexible and can therefore guarantee permanent rigidity in case of impacts or vibration

Typical Properties (cured):
Pot life: 5 minutes
Hand strength: 10 - 12 minutes
Functional Strength (20 °C): 20 - 30 minutes
Final curing (25 °C): 24 hours
Temperature range: -40 °C up to +80 °C
Gap fill: up to 3 mm
Hardness Shore D: 60
Tensile shear strength (25 °C): > 10 N/mm²

Processing:
The bonding surfaces must be clean, oil and grease-free. Excellent results are obtained by a mechanical roughening of the adhesion surfaces. Twist
off cap, attach and tighten the mixing nozzle. Push the material out with the dispensing gun and discard the first 2 g, as they are not yet mixed at 1:1. Setting time can be curtailed at high temperatures. Join workpieces together and fix. Do not apply below 5 °C.

Easy handling thanks to the automatically regulated two-nozzle system. The practical cartridge is not designed for use with a dosing gun, it is simply squeezed out by hand.

Please order mixing tube FINE and mixing tube and dosing gun for 50 g cartridges separately.