Film release agent PVA

Easy to handle and safe release agent for epoxy, vinyl ester, and polyester resins

Silicone free
Water-soluble
Curing temperatures up to max. 100 °C

Processing:
After drying, a glossy, tough, foil-like lacquer film is produced. Residues can be washed off with water.

The film release agent PVA can e.g. be applicated with HVLP-Spray guns with a 0.5 mm nozzle and a maximum material pressure of 3 bar. The material pressure must be adjusted for each application.

all Prices price incl. VAT, possibly plus shipping

Article information

MSDS Release agent PVA (PDF)

Hazards identification - Film release agent PVA

Hazard components for labelling

propan-2-ol; isopropyl alcohol; isopropanol
butan-2-ol

Signal word: Danger

Pictograms:

Hazard statements

H225	Highly flammable liquid and vapour.
H319	Causes serious eye irritation.
H336	May cause drowsiness or dizziness.

Precautionary statements

P210	Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P260	Do not breathe dust / fume / gas / mist / vapours / spray.
P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P337 P313	If eye irritation persists: Get medical advice / attention.
P370 P378	In case of fire: use carbon dioxide (CO2), foam, extinguishing powder for extinguishing.
P403 P233	Store in a well ventilated place. Keep container tightly closed.

Film release agent PVA