containing silicone, up to 100 °C
FORMULA FIVE® Mold release wax is a wax-based mixture developed for high gloss surfaces and excellent abrasion resistance.
Carnauba wax with modern synthetic waxes. For high-gloss surfaces. Polishing properties after a drying time of approx. 10-12 minutes.
Application instructions of the manufacturer:
Rub wax thoroughly onto the clean surface of the mould. Allow the wax to remain on the mould until moderately dry (the wax will appear hazy). Buff with clean towelling, we recommend our cleaning and polishing cloth (item no. 365-SHT) until a clear high gloss appears. Rebuff the entire mould surface with cleaning towelling. Note: Use 2 to 3 coats of wax on the first application only. Re-wax and buff as necessary.
Consumption: 20-60 g/m2 (quantity depends on the condition of the mould surface)
Important note on substrates:
This product contains solvents based on hydrocarbons (see under Additional Information --> Safety Data Sheet). It also contains a small amount (< 2 %) of aromatic hydrocarbons. Some surfaces made of plastic (e.g. polycarbonate, Plexiglas®, various varnishes, putties) are dissolved by it so that an impression cannot be taken. It is essential to check this before use, either by referring to resistance lists for the materials or by carrying out a preliminary test.
For sensitive surfaces, we alternatively recommend PARTALL® Coverall Film PVA from Rexco.
For more info see (in german, translator included) R&G Wiki
all Prices price incl. VAT, possibly plus shipping
Hazard components for labellingHydrocarbons, C11‐C14, n‐alkanes, isoalkanes, cyclics, < 2% aromatics
Signal word: Danger
|H304||May be fatal if swallowed and enters airways.|
|P101||If medical advice is needed, have product container or label at hand.|
|P102||Keep out of reach of children.|
|P103||Read label before use.|
|P301 P310||IF SWALLOWED: Immediately call a POISON CENTER or doctor.|
|P331||Do NOT induce vomiting.|
|P405||Store locked up.|
|P501||Dispose of waste according to applicable legislation.|