Desiccator (PP/PC / 9.2 liter / Ø 250 mm)

    Desiccator (PP/PC / 9.2 liter / Ø 250 mm)

    Implosion-proof PP/PC desiccators with a volume of 9.2 l. Will take vacuum of -986.7 mbar with loss (absolute zero: -1013 mbar) not exceeding 26.7 mbar in 24 hours.

    Volume: 9.2 l
    Diameter: approx. 250 mm
    Outer height: approx. 300 mm
    Inner height: approx. 225 mm
    General dimensional tolerance: ±0.2 mm

    Max. temperature range: 50 °C

    The transparent polycarbonate cover seals onto a neoprene ‘0’ ring set into the flange of the PP base. A little grease spread on the ‘0’ ring will assist in establishing the initial vacuum. Within the desiccator is a removable pan for holding a drying agent.

    Vacuum release tap/nonreturn valve assembly is included; a specially grooved stopper in this assembly allows air, when required, to be re-admitted very slowly to avoid disturbing the contents.

    Usage instructions:

    1. Remove the cover in PC - insert the samples in the pan.
    2. Open the vacuum retention valve (PE needle) connect the tube of the pump to the desiccator spigot in order to create a vacuum.
    3. Close the vacuum retention valve.

    Valve for hose with inner-Ø 10 mm, for the connection of a tube with inner-Ø 6 mm please order the adapter set (item no. 390 104-RS) separately.

    The desiccator PP / PC is supplied without a perforated plate, which is not required if the desiccator is only used for the venting of resins or silicones. On the one hand, perforated plates serve to enlarge the supporting surface; on the other hand, they are required if substances are to be dried in the desiccator.

    Desiccator (PP/PC / 9.2 liter / Ø 250 mm)


    Item no.  390104-250-1 51 in stock  (delivery time 1-2 days)

    Add to Shopping List

    (Base Price 101,33 € /  pc.)

    Scaled Price

    • From Qty 2:  5,0%
    • From Qty 3:  10,0%
    • From Qty 5:  15,0%
    - +

    all Prices  price incl. VAT, possibly plus shipping