Epoxy Resin HT 2 + Hardener HT 2 (45 min)

Epoxy Resin HT 2 + Hardener HT 2 (45 min)

Epoxy Resin HT 2 + Hardener HT 2 (45 minutes), set of two components

Solvent- and filler-free, transparent laminating and coating system of very low viscosity with an tack-free, glossy surface.

  • Highly transparent, very light, max. slightly reddish in thicker layer
  • The high degree of UV stability
  • Tack-free curing even of thin layers
  • Also for casting in layer thicknesses up to 5 mm in one operation
  • Free of nonylphenol

Epoxy Resin HT 2 is suitable for impregnating glass, aramid, and carbon fibres* and for bonding wood, metal, foamed polystyrene, etc..

*Owing to its low surface tension the system exhibits good filler absorption properties. And it has excellent wetting properties with respect to reinforcing fibres of glass, aramid, and carbon.

Epoxy Resin HT 2 is a laminating resin of very low viscosity based on bisphenol A/F. The bisphenol F component reduces the viscosity and prevents the resin from forming crystals at low storage temperatures (less than + 5 °C).

Epoxy Resin HT 2 is diluted with a difunctional reactive compound and is free of solvents and fillers.

The system is highly transparent and yields in conjunction with finished glass fabrics (Finish FK 144/FK 800) highly transparent laminates with
good light fastness.

Processing time: 45 minutes

Mixing ratio:
100 : 48
parts by weight of resin to hardener
100 : 55 parts by volume of resin to hardener

Curing time: 24 hours
Cold curing

Material characteristics (pure resin hardened) Epoxy Resin HT2 with Hardener HT2:

Flexural strength in MPa 100
Tensile strength in MPa 71
Impact strength in kJ/m² 27
Tensile modulus in MPa 3.0 . 103
Initial viscosity in mPas 315
Glas transition temperature in °C 60

CYTOX Report on the Resin System Epoxy Resin L + Hardener L (see below under Additional Information): this system is not cytotoxic (cell-damaging), important for applications in medical technology.

Application:
Highly transparent, water-resistant laminates, above all for surfboards, snowboards, boat linings, aquarium accessories, light domes, solar cell coatings, floor finishes.

The Epoxy resin HT 2 is suitable for all common processing methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc..

Metal, wood, plastics, ceramics, etc., can be joined with high-strength bonds without the application of contact pressure. Curing takes place virtually free of shrinkage.

Hardener HT 2:
Cycloaliphatic amine that is used at room temperature. As with all cold-curing epoxy resin systems, it is also possible to apply additional hot curing at 50 °C for ten hours to enhance the mechanical and thermal properties.

Weitere Infos im eWiki.

R&G

Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g

200 g Epoxy resin HT 2 + 96 g hardener HT 2

Item no.  1051000 Only 15 left in stock, more on the way  (delivery time 1-2 days)

Add to Shopping List

18,86 
(Base Price 63,72 € /  kg)
- +
R&G

Epoxy Resin HT 2 + Hardener HT 2, kit/ 1 kg

675 g Epoxy resin HT 2 + 325 g hardener HT 2

Item no.  1051001 Only 14 left in stock, more on the way  (delivery time 1-2 days)

Add to Shopping List

39,46 
(Base Price 39,46 € /  kg)

Scaled Price

  • From Qty 2:  5,00%
  • From Qty 3:  10,00%
- +

all Prices  price incl. VAT, possibly plus shipping

Article information

type: ga
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Instructions for use
type: si
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
MSDS
type: pi
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Product information
type: td
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
type:
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]

Hazards identification - Epoxy Resin HT 2

Hazard components for labelling

2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] bisoxirane
Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4- (oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2'-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane
Reaction products of hexane-1,6-diol with 2-(chloromethyl) oxirane (1:2)

Signal word: Warning

Pictograms:

GHS07 GHS09

Hazard statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P333 P313 If skin irritation or a rash occurs: Get medical advice / attention.
P501 Dispose of waste according to applicable legislation.

Special labelling of certain mixtures

EUH205 Contains epoxy constituents. May produce an allergic reaction.

Hazards identification - Hardener HT 2

Hazard components for labelling

3-aminomethyl-3,5,5-trimethyl-cyclohexylamine
Benzyl alcohol
Phenol, styrenated

Signal word: Danger

Pictograms:

GHS05 GHS07

Hazard statements

H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects

Precautionary statements

P260 Do not breathe dust / fume / gas / mist / vapours / spray.
P303 P361 P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor / physician.
P405 Store locked up.