The image shows four containers of epoxy resin and hardener. They have labels with text in German and English, including product names and safety information. The containers are of different sizes, with some having red caps and others with white. The largest container has a pump dispenser.

set of 2 components:
635 g and 1.27 kg

Epoxy Resin L + Hardener EPIKURE™ 111 (10-15 min, MV 100:27)

Set of 2 components

Unfortunately, the hardener EPIKURE™ 111 is no longer produced by the manufacturer.

Product range adjustment. This discontinued item is of perfect quality and free from defects. Available while stock last.

The combination of Epoxy Resin L laminating epoxy resin with rapid Hardener EPIKURE™ 111 gives a low viscosity cold curing epoxy system. This epoxy resin system has good wetting and adhesion characteristics on glass, carbon, aramid and polyester fibres.

Application:
The system is suitable for hand laminates. The high reactivity of the resin system gives a short mould residence time especially in case of difficult laminates and sandwich lay-ups. This system finds particular application e.g. in glider and boat building. The system is not approved for use in aviation.

Processing:

Processing time: 10 - 15 minutes

Mixing ratio:
100 : 27 parts by weight of epoxy resin L : Hardener EPIKURE™ 111

Curing time:
After a room temperature precure, a postcure at 50 - 60 °C may be used to improve the deflection
temperature under load.

Technical data:

Physical properties (at time of processing):

Property	Epoxy Resin L	Hardener EPIKURE™ 111
Viscosity at 25 °C in mPa*s	700 ± 70	400 ± 100
Density at 20 °C in g/cm³	1.15	1.04 ± 0.01
Colour	gelblich
Epoxy-äquivalent weight in g/äquiv.	179
Amine-äquivalent weight in g/äquiv.		49
Refractive index at 25 °C in nD 25	1.547
Pot life at 20-25 °C in min	10-15

Precautionary statements	H-statements
H315	Causes skin irritation.
H317	May cause an allergic skin reaction.
H319	Causes serious eye irritation.
H411	Toxic to aquatic life with long lasting effects.

Precautionary statements	P-statements
P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P273	Avoid release to the environment.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P333 P313	If skin irritation or a rash occurs: Get medical advice / attention.
P501	Dispose of waste according to applicable legislation.

Precautionary statements	H-statements
H314	Causes severe skin burns and eye damage.
H317	May cause an allergic skin reaction.
H410	Very toxic to aquatic life with long lasting effects.

Precautionary statements	P-statements
P261	Avoid breathing dust/fume/gas/mist/vapours/spray.
P273	Avoid release to the environment.
P280	Wear protective gloves / protective clothing / eye protection / face protection.
P301 P330 P331	IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305 P351 P338	IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310	Immediately call a POISON CENTER or doctor / physician.
P362 P364	Take off contaminated clothing and wash it before reuse.
P405	Store locked up.
P501	Dispose of waste according to applicable legislation.

Epoxy Resin L + Hardener EPIKURE™ 111 (10-15 min, MV 100:27)

Set of 2 components

Epoxy Resin L + Hardener EPIKURE™ 111 (15 min.) kit/ 635 g

Article information

Hazards identification - Epoxy Resin L

Pictograms:

Hazard statements

Precautionary statements

Special labelling of certain mixtures

Hazards identification - Hardener EPIKURE™ Curing Agent 111

Pictograms:

Hazard statements

Precautionary statements