max. 120 °C
Elongation at break approx. 300 %

Bagging film RED 30 my, 150 cm

Bagging film for vacuum moulding. Suitable for polyester and epoxy resins.

This modified polyethylene film is easy to process and gives the component a silk-matt surface.

Suitable for the production of convex or concave components without strong beads, edges, and peaks (e.g. plates and tub-like shapes). Despite a good stretching ability, the vacuum bagging film is not elastic, such as a silicone sheet. If the film has been overstretched, it can only be used once.

Over sharp edges and areas that span recesses, the film can tear under high pressure.

We do not recommend this film for very complex geometries, or we advise preliminary tests.

Technical data:
Processing temperature: Up to 120 °C
Thickness: 0.030 mm (30 µm)
Width: 150 cm
Elongation at break: MD* ≥ 250 %, TD* ≥ 350 %
Tensile strength: MD* ≥ 12 MPa, TD* ≥ 15 MPa
Material: Polyethylene, silk-matt surface
Colour: Red

Caution:
Only conditionally suitable for processing in autoclaves.

* MD Machine direction, TD Transverse direction

Bagging film RED (30 μ, 120 °C) 150 cm, pack/ 2 m

(Surface area: 3 m²)

Item no. 390501-150-NP-2 Only 11 left in stock, more on the way (delivery time 1-2 days)

Add to Shopping List

5,51 €

(Base Price 1,84 € / m² )

Scaled Price

From Qty 2: 5,00%

Bagging film RED 30 my, 150 cm

Bagging film RED (30 μ, 120 °C) 150 cm, pack/ 2 m

Bagging film RED (30 μ, 120 °C) 150 cm, roll/ 3 m

Bagging film RED (30 μ, 120 °C) 150 cm, roll/ 5 m

Bagging film RED (30 μ, 120 °C) 150 cm, roll/ 10 m

Bagging film RED (30 μ, 120 °C) 150 cm, roll/ 20 m

Bagging film RED (30 μ, 120 °C) 150 cm, roll/ 50 m

Bagging film RED (30 μ, 120 °C) 150 cm, roll/ 200 m

Article information